Cylinder
To supply specialty gases (toxic, flammable and corrosive etc.) safely with high quality, Taiyo Nippon Sanso uses Mn Steel Seamless Cylinder, SUS Steel Seamless Cylinder, SUS Steel Welded Cylinder and Aluminum Alloy Cylinder etc. in accordance with purpose. These cylinders are applied to the high pressure gas safety law in Japan and JIS-B8241.
| Cylinder size | Material | Diameter×Height(mm) | Weight(kg) | Remarks | Figure No. |
| 48 | Aluminum Alloy | 250×1,463（1,489） | 41.8±0.8 | Clean cylinder available | ① |
| 47 | Mn Steel | 232×1,468（1,494） | 53.0±3.0 | Clean cylinder available | ② |
| 40 | SUS Steel (Welded) | 220×1,313（1,339） | 22.0±2.0 | Clean cylinder available | ③ |
| 40 | Mn Steel | 232×1,293（1,319） | 47.5±3.0 | Clean cylinder available | ④ |
| 10 | 2 phase SUS Steel | 140×938（964） | 14.3±1.8 | Clean cylinder available | ⑤ |
| 10 | SUS Steel (Welded) | 140×928（954） | 9.3±0.5 | Clean cylinder available | ⑥ |
| 10 | Mn Steel | 140×928（954） | 12.6±1.6 | Clean cylinder available | ⑦ |
| 9.4 | Aluminum Alloy | 175×687（713） | 9.55±0.15 | Clean cylinder available | ⑧ |
| 6.6 | Carbon Steel | 157.5×574 | 10.0±0.5 | SDS（3X）用 For SDS |
⑨ |
| 3.4 | Carbon Steel | 140×443（469） | 5.8±0.8 | - | ⑩ |
| 2.25 | Carbon Steel | 101.6×445 | 3.0±0.5 | SDS（4X）用 For SDS |
⑪ |
| 1 | Mn Steel | 76.3×438（464） | 2.8±0.4 | - | ⑫ |
| 0.44 | Carbon Steel | 50.8×408 | 1.0±0.05 | SDS（7X）用 For SDS |
⑬ |
| 0.35 | Carbon Steel | 50.8×345.2（356.2） | 1.4±0.05 | - | ⑭ |
※Height of Cylinder:: Height from the ground to top of the cylinder valve.
The value in the ( ) is height of cylinder with Pneumatic valve. Actual height of cylinders are different from each other.
※Weight of Cylinder:: Weight of cylinder itself. Weight of valve is not included in the value.
※Note: The above measurement is rough standard. If you need further information, please feel free to contact us.